FIRST RESPONDER CUT LOOP - FRONT TRUNK EMERGENC The front trunk fi rst responder cut loop consists of low voltage wires. Cutting this loop shuts down the high voltage system and disables the SRS and airbag components. See cut instructions on page 11. NOTE: When cutting the loop, double cut to remove an entire section. This eliminates the risk of the cut wires accidentally reconnecting. Y RESPONSE GUIDE DIS ABLING HIGH V O L T The front trunk cut loop is located on the right side, A under the hood and the plastic access panel GE WARNING: Regardless of the disabling procedure you use, ALWAYS ASSUME THAT ALL HIGH VOLTAGE COMPONENTS ARE ENERGIZED! Cutting, crushing or touching high voltage components can result in serious injury or death. 11
![Model S | 2014-2015 Emergency Response Guide - Page 13](/cdn-cgi/image/width=600,quality=80,format=webp/https://cdn.relayto.com/images_originals/5c3cb5c15d656.jpeg)