Tire Care and Maintenance Warning: Road holding is seriously Removing and Installing Lug Nut Covers impaired if the tires are incorrectly If your Model X is equipped with lug nut installed on the wheels. covers, you must remove them to access the lug nuts. To remove a lug nut cover: 1. Insert the curved part of the lug nut cover tool (located in your glovebox) into the hole at the base of the Tesla "T". 2. Maneuver the lug nut cover tool so that it is fully inserted into the hole in the lug nut cover. 3. Twist the lug nut cover tool so that the curved part is touching the middle of the lug nut cover. 4. Firmly pull the lug nut tool away from the wheel until the lug nut cover is released. To install the lug nut cover: 1. Align the lug nut cover into position. 2. Push firmly on the lug nut cover until it fully snaps into place. 186 Model X Owner's Manual