Front and Rear Seats Moving Second Row Bench Seats Note: Only bench seats in seven-seat vehicles can be moved forward and rearward. The bench seats in five-seat vehicles are stationary. Use the mechanical lever located beneath each outboard seating position to move the second row seats forward or rearward. The bench seats have a 60/40 split—therefore, the lever on the left side moves the seat for the left and center seats, whereas the lever on the right side moves only the rightmost seat. Pull and hold the lever while moving the seat forward or rearward. Release the lever when the seat is at the desired location. Warning: Riding in a moving vehicle with Note: You can adjust the position of bench the seat back reclined can result in seats using the mechanical levers only. You serious injuries in a collision, as you could cannot use the touchscreen to adjust bench slide under the lap belt or be propelled seats. into the seat belt. Ensure the backs of occupied seats are reclined no more than 30 degrees when the vehicle is moving. Accessing Third Row Seats (if equipped) - Monopost Seating Folding Second Row Seat Backs A third row ingress button is located on the (Bench Seats) backrest of each second row outboard The second row seat backs on bench seats monopost seat. This button makes it easy for can be folded fully forward so they lay flat and passengers to enter and exit the third row maximize cargo space. Pull up the mechanical seating positions. Touch Controls > Seats > lever located on the side of each outboard Easy Entry and choose how you want this seat (the same lever you use to recline the button to work: seats, as described above), then push the seat • ON - Allows you to tilt and move the back fully forward. The bench seats have a associated outboard seat fully forward, 60/40 split—therefore, the adjustment lever and the center seat partially forward, with on the left side folds the seat backs for both a single-press of the button. the left and center seats, whereas the lever on • OFF - When off, which is recommended if the right folds the rightmost seat back only. a child seat is installed in the second row, Note: Before folding seats fully forward, you must hold the button to move the remove any items from the seats and the rear second row seats forward. footwell. To allow the seat backs to fold completely flat, you may need to move the front seats forward. 26 Model X Owner's Manual