Dashcam 8. Right-click on the folder, select Rename, Within the “TeslaCam” folder, there are three and name the folder to “TeslaCam” sub-folders: Recent Clips, Saved Clips, and (without quotation marks). Click "Save". Sentry Clips. The footage in Recent Clips This folder will contain all of the recent constantly loops in a 60-minute cycle when and saved clips from Sentry Mode and the cameras are activated. Therefore, the dashcam. footage is constantly being overwritten every 9. Properly eject the USB flash drive from hour unless the footage is saved. When an your personal computer. event is recorded, one video is recorded for each of the front, rear (if equipped), left, and For Windows: right cameras. 1. Insert the USB flash drive into your Saved footage is located in either the Saved personal computer. Clips or Sentry Clips folder. Footage in the 2. Navigate to File Explorer. Saved Clips folder contains all saved 3. Right-click on your USB flash drive and recordings from dashcam, which have been select "Format...". manually saved by touching the dashcam icon on the touchscreen. Sentry Clips contains all 4. In the pop-up menu, under the File saved footage from Sentry Mode events, System section, select “FAT 32”. which have been automatically saved when Note: You can also name your USB (under the Alert or Alarm state was triggered. Once Volume Label) for easier recognition. footage of a particular event is saved, the 5. Check the “Quick format box” and click latest 10 minutes of video is archived in your Start. flash drive labeled with a unique timestamp. 6. Go back to File Explorer, click on your Note: If your USB flash drive is getting full, the flash drive, and right-click to create a oldest footage in Sentry Clips will be deleted folder, or select “New Folder” in the top to make room for new footage. Once the older menu. footage is deleted, you will not be able to 7. Name the folder “TeslaCam” (without retrieve them. When the flash drive is full, quotation marks) and click "Save". This Sentry Mode and dashcam can no longer save folder will contain all of the recent and video footage to your flash drive. saved clips from Sentry Mode and Note: To prevent the flash drive from getting dashcam. full, move the saved videos to another device 8. Properly eject the USB flash drive from as soon as possible. your personal computer. Note: You are responsible for complying with Once you have created the “TeslaCam” folder all local laws, regulations, and property in your USB flash drive and ejected it from restrictions regarding video. The cameras do your personal computer, insert the flash drive not record audio. into one of the front USB ports in Model X. Do not use the rear USB ports, as they are solely meant for charging devices. It may take your vehicle up to 15 seconds to recognize the flash drive. When recognized, icons for dashcam and Sentry Mode appear at the top of your touchscreen (note that you may need to enable to Sentry Mode by going to Controls > Safety & Security > Sentry Mode). Your vehicle is ready to record video. Retrieving Footage To retrieve video footage from the flash drive, remove the flash drive from the front USB port and use a personal computer or other device to access the files. Navigate to the “TeslaCam” folder on the flash drive. 84 Model X Owner's Manual