Child Safety Seats Once installed, test the security of the installation before seating a child. Attempt to twist the child safety seat from side to side and try to pull it away from the seat, then check to ensure the anchors remain securely in place. Note: Lower LATCH anchors should not be used with child seats or booster seats that have an integrated safety belt in situations where the combined weight of the child plus the child restraint is more than 65 lbs (29 kg). In these situations, use the safety belt instead. Attaching Upper Tether Straps Install LATCH child safety seats in the If an upper tether strap is provided, attach its outboard seating positions only. Use only a hook to the anchor point located on the shelf seat belt retained seat in the center position. behind the rear seating positions. Warning: Tighten upper tether straps according to the instructions provided by the manufacturer of the child safety seat. Warning: USE ONLY SEAT BELT RETAINED CHILD SAFETY SEATS IN THE CENTER SEATING POSITION. To install a LATCH child safety seat, slide the safety seat latches onto the anchor bars until they click into place. Carefully read and follow the instructions provided by the child safety To access an anchor point, press down on the seat manufacturer. back of its cover. Seating and Safety Restraints 27