book.book Page 9 Friday, July 19, 2013 12:53 PM Child Safety Seats Installing ISOFIX Child Seats To install a ISOFIX retained child safety seat, Lower ISOFIX anchor points are provided at all slide the safety seat latches onto the anchor three second row seating positions and are bars until they click into place. Carefully read located between the seat back rest and rear and follow the instructions provided by the cushion. The exact location of each anchor child safety seat manufacturer. point is indicated by the child safety seat identification tab on the seat. Once installed, test the security of the installation before seating a child. Attempt to twist the child safety seat from side to side and Although ISOFIX anchor points are provided at try to pull it away from the seat, then check that all three rear seating positions, you can only use the anchors are still securely in place. two at the same time. To seat three children, use a non-ISOFIX retained seat in the middle. When installing two ISOFIX retained child safety seats, you cannot install them adjacent to each other with one in the middle and the other on the left (driver’s side). SEATING AND SAFETY RESTRAINTS 3.9