book.book Page 23 Friday, July 19, 2013 12:53 PM HomeLink® Universal Transceiver HomeLink® Universal Transceiver ® About HomeLink If Model S is equipped with the optional tech package, you can program the HomeLink® Universal Transceiver to operate up to three garage doors, gates, lights, and security systems that can transmit Radio Frequency (RF) signals. Programming HomeLink 1. Park in front of the device you want to program, and have the device’s remote control ready. 2. Touch Controls > Settings > HomeLink on the touchscreen. 3. Touch Enter Name, then use the onscreen keyboard to enter a name for your HomeLink device. 4. Touch Create HomeLink. 5. Follow the onscreen instructions. Once programmed, you can operate the device by touching its corresponding HomeLink icon on the touchscreen’s status bar. HomeLink remembers the location of your programmed devices. When you approach a known location, the HomeLink control on the touchscreen automatically drops down. When you drive away, it disappears. NOTE: For security reasons, erase your HomeLink settings if you sell Model S. WARNING: Your device might open or close during programming. Before programming, make sure that the device is clear of any people or objects. WARNING: Do not use the HomeLink Universal Transceiver with a garage door that does not meet federal safety standards. A garage door opener that cannot detect an object in its path and then automatically stop and reverse, does not meet these standards. Using a garage door opener without these features increases the risk of injury or death. USING THE TOUCHSCREEN 5.23
![Tesla Model S | Owner's Manual - Page 87](/cdn-cgi/image/width=600,quality=80,format=webp/https://cdn.relayto.com/images_originals/5c3cb7b44e16b.jpeg)