Child Safety Seats degrees rearward from its forward-most position). Warning: Do not associate the Easy Entry setting with the driver's profile when a child is seated in the second row. Doing so can cause the driver's seat to push against the child, especially when the child is seated in a forward-facing child seat or booster seat. Do not rely on Model X to recognize or accommodate a child seated in the second row while using this setting. See Easy Entry on page 46. Note: To accommodate large rear-facing Warning: For vehicles with third row LATCH child safety seats, you may need to seats, when a child is seated in a second move the seat in the full rearward position, row monopost seat, the setting for the and move the corresponding front seat button that moves a second row forward to the mid-track position (up to 13 cm outboard seat forward for easy access forward of the rearmost position), raise the into the third row should be OFF (touch seat upward (3 cm from its lowest position), Controls > Seats > Easy Entry). This and angle the seat back to 15 degrees (or 10 ensures that you need to manually hold degrees rearward from its forward-most the button to move the seat, preventing a position). child seated in the second row from being Warning: Do not associate the Easy Entry pushed against the corresponding front setting with the driver's profile when a seat. See Accessing Third Row Seats (if child is seated in the second row Doing so equipped) - Monopost Seating on page can cause the driver's seat to push 26). against the child, especially when the To install a LATCH child safety seat, slide the child is seated in a forward-facing child safety seat latches onto the anchor bars until seat or booster seat. Do not rely on Model they click into place. Carefully read and follow X to recognize or accommodate a child the instructions provided by the child safety seated in the second row while using this seat manufacturer. setting. See Easy Entry on page 46. BENCH SEATS: MONOPOST SEATS: Note: To accommodate large rear-facing LATCH child safety seats, you may need to move the seat in the full rearward position, and move the corresponding front seat forward to the mid-track position (up to 13 cm forward of the rearmost position), raise the seat upward (3 cm from its lowest position), and angle the seat back to 15 degrees (or 10 Seating and Safety Restraints 37