Summon Summon Summon (if equipped) allows you to • Side Clearance: Choose an option to automatically park and retrieve Model X while specify how much side clearance you you are standing outside the vehicle. Summon want to allow. Tight allows Model X to uses data from the ultrasonic sensors to move enter and exit very narrow parking spaces. Model X forward and reverse up to 39 feet (12 Warning: Parking in a narrow space meters) in, or out of, a parking space. limits the ability of the sensors to To move Model X a distance of up to 475 feet accurately detect the location of (145 meters) while steering around objects, obstacles, increasing the risk of you can use Smart Summon and your mobile damage to Model X and/or phone. Smart Summon allows your vehicle to surrounding objects. find you (or you can send your vehicle to a • Require Continuous Press: By default, chosen location). See Smart Summon on page Summon requires that you press and hold 118. a button on the mobile app or key to Warning: Summon is designed and move Model X during the parking process. intended for use only on parking lots and When Require Continuous Press is set to driveways on private property where the NO, you can press and release the button surrounding area is familiar and —you don't need to hold it down to keep predictable. the vehicle moving. Also, Require Continuous Press must be set to NO if you Warning: Summon is a BETA feature. You want to operate Summon using the key must continually monitor the vehicle and instead of the mobile app (see Operating its surroundings and stay prepared to Summon with the Key on page 116), or if take immediate action at any time. It is you want to start a parking sequence from the driver's responsibility to use Summon inside the vehicle (see Starting Summon safely, responsibly, and as intended. Before Exiting the Vehicle on page 117). Warning: Summon's performance • Use Auto HomeLink (if equipped): Set to depends on the ability of the ultrasonic ON if you want to activate HomeLink to sensors to determine the vehicle's open/close a programmed HomeLink proximity to objects, people, animals, and device (such as a gate or a garage door) other vehicles. during the parking process when using Summon or Smart Summon. If enabled, Before Using Summon the device automatically opens and closes when Model X enters or exits during a Before operating Summon, use the Summon session. In an Smart Summon touchscreen to enable it and customize how session, the device automatically opens you want it to work. Touch Controls > when, at the beginning of a session, Smart Autopilot > Summon, then touch Customize Summon detects that Model X is parked in and adjust the following settings to suit your a garage. preferences: Warning: Always ensure that Model X • Bumper Clearance: Set the distance that is fully in or out of a garage before you want Summon to stop from a HomeLink lowers the garage door. detected object (for example, you may Summon and Smart Summon cannot want Summon to stop within just a few detect where an overhead door will inches of a garage wall). Note that this lower. distance applies only to objects that Note: When enabled, the HomeLink device Summon detects directly in front of automatically opens and closes when Model X when moving forward, or directly using Summon, and automatically opens behind Model X when reversing. as needed when using Smart Summon. To • Summon Distance: Set a maximum automate HomeLink in other situations distance that Model X can travel when (such as normal driving), you must adjust entering or exiting a parking space. the HomeLink device's main settings by touching the HomeLink icon at the top of the touchscreen (see HomeLink Universal Transceiver on page 164). Note: The above settings, with the exception of HomeLink, apply only to Summon—not Smart Summon (see Before Using Smart Autopilot 115