Summon Summon on page 118). You can not customize If you used Summon to park Model X, you can Smart Summon's bumper clearance, distance, then use Summon to return Model X back to and side clearance. And when using Smart its original position (provided the vehicle has Summon, you must always hold down the remained in Park), or to the maximum button on the mobile app to keep Model X Summon Distance that you have specified moving. Also, Smart Summon operates with (whichever comes first). Simply specify the the mobile app only—not the key. opposite direction on the mobile app and Note: All settings are retained until you Summon moves the vehicle along the original manually change them. path, provided no obstructions have been introduced. If the ultrasonic sensors detect an obstacle, Summon attempts to avoid the Using Summon to Park and Retrieve obstacle while staying very close to its original your Vehicle path (Summon does not steer around obstacles). Follow these steps to use Summon to park Note: To move Summon multiple times in the your Model X: same direction (not to exceed the maximum • Align Model X within 39 feet (12 meters) of 39 feet (12 meters), cancel Summon and of the parking space so Model X can then restart the parking process using the follow a straight path into or out of the same direction. space in either Drive or Reverse. Note: Although Summon can move Model X a • From outside the vehicle, initiate the short distance laterally to avoid an obstacle, it parking maneuver by touching Summon does not attempt to steer around an obstacle on the mobile app, then holding down the to return the vehicle to its original driving FORWARD or REVERSE button. path. Only Smart Summon can steer the Note: If the Require Continuous Press vehicle around objects. setting is NO, you do not need to hold Note: Summon requires that Model X can down the button, just press and release. detect a valid key nearby. Note: You can also initiate the parking Warning: Model X cannot detect maneuver from inside the vehicle (see obstacles that are located lower than the Starting Summon Before Exiting the bumper, are very narrow, or are hanging Vehicle on page 117). from a ceiling (for example, bicycles). In Summon shifts Model X into Drive or Reverse addition, many unforeseen circumstances (based on the direction you specified) and can impair Summon's ability to move in or drives into or out of the parking space. When out of a parking space and, as a result, parking is complete, or if an obstacle is Summon may not move Model X detected, Summon shifts Model X into Park. appropriately. Therefore, you must Summon shifts Model X into Park when: continually monitor the vehicle's • Model X detects an obstacle in its driving movement and its surroundings and path (within the Bumper Clearance setting remain prepared to stop Model X at any that you specified). time. • Summon has moved Model X the Operating Summon with the Key maximum distance of 39 feet (12 meters). • You release the FORWARD or REVERSE Note: Using the key to operate Summon is button (when Require Continuous Press is available only in the United States. turned on). Note: Summon may not operate if the key's • You press any button to manually stop battery is low. Summon. Follow these steps to park Model X from outside the vehicle using the key: 1. On the touchscreen, ensure that Require Continuous Press is disabled (touch Controls > Autopilot > Summon > Require Continuous Press > NO). 116 Model X Owner's Manual