Controls Quick Controls Quick Controls displays by default to provide quick access to commonly- used features. For many of these features, more options are available on the feature-specific tabs below Quick Controls. • Exterior lights OFF Exterior lights will be off until you manually turn them back on. The exterior lights are set to AUTO by default at the start of every drive. PARKING The exterior side marker lights, parking lights, tail lights, and license plates lights turn on. ON Exterior lights are on. AUTO Exterior lights automatically turn on if Model X detects low lighting conditions. Note: For more information on exterior lights, see Lights on page 58. • Front Fog: If equipped (only available in certain regions). • Rear Fog: If equipped (only available in certain regions). • Mirror Fold: Fold or unfold side mirrors. • Front and Rear Trunk: Touch the buttons next to the front or rear trunk to open. • Open Doors: Touch the icons associated with each door to open. For falcon wing doors, you can set the height at which you would like it to open. • Display Brightness: Adjust the brightness of the display. Seats • Adjust the seats: Adjust the second row seats by using the forward and backward buttons. • Easy Entry: When enabled, you can move a second row seat all the way forward or backward by touching the forward/backward button once. When off, you must hold the button to move the second row seats fully forward/backward (see Accessing Third Row Seats (if equipped) - Monopost Seating on page 26). Suspension (if • Ride Height: Adjust the ride height, ranging from Low to Very High. equipped) • Jack: Disables self-leveling of the air suspension. • Suspension Lowering: Selecting NEVER maintains the standard height whereas AUTO adjusts the height based on road type (see Air Suspension on page 157). Note: Model X must be powered on and you must press the brake pedal before you can change suspension settings. Warning: The air suspension system causes Model X to self-level, even when powered off. Therefore, when transporting or lifting, you must engage Jack Mode to disable self-leveling (see Instructions for Transporters on page 215 and Jacking and Lifting on page 196). Using the Touchscreen 131