Phone ® When paired, Model 3 automatically connects Bluetooth Compatibility to the phone, and the touchscreen displays You can use your Bluetooth-capable phone the Bluetooth symbol next to the phone†s hands-free in Model 3 provided your phone is name to show that the connection is active. within operating range. Although Bluetooth typically supports wireless communication Importing Contacts and Recent over distances of up to approximately 30 feet (9 meters), performance can vary based on Calls the phone you are using. Once paired, you can use the Bluetooth Before using your phone with Model 3, you settings screen (touch the Bluetooth icon on must pair it. Pairing sets up Model 3 to work the touchscreen's status bar) to specify with your Bluetooth-capable phone (see whether you want to allow access to your Pairing a Bluetooth Phone on page 91). phone†s contacts and recent calls. You can pair up to ten Bluetooth phones. If access is turned on, you can see your list of Model 3 always automatically connects to the contacts and recent calls on the Model 3 last phone that was used (provided it is within touchscreen. Touch Phone > Contacts. You range). If you want to connect to a different can then touch a contact to dial its phone phone, see Connecting to a Paired Phone on number or navigate to its address. page 92. Note: Before contacts can be imported, you Note: On many phones, Bluetooth turns off if may need to either set your phone to allow the phone†s battery is low. syncing, or respond to a popup on your phone Note: In addition to phones, you can also pair to confirm that it is OK to sync contacts. This Bluetooth-enabled devices with Model 3. For varies depending on the type of phone you example, you can pair an iPod Touch or an are using. For details, refer to the owner iPad or Android tablet to stream music. documentation provided with your phone. If access is turned on, imported information is Pairing a Bluetooth Phone displayed when you touch the contacts tab on the Phone app. Pairing sets up Model 3 to work with your Note: For security reasons, erase your Bluetooth-capable phone. Once a phone is contacts if you sell Model 3 (see Erasing paired, Model 3 can connect to it whenever Personal Data on page 83). the phone is within range. To pair a phone, follow these steps while Unpairing a Bluetooth Phone sitting inside Model 3: 1. Ensure both the touchscreen and the If you want to disconnect your phone and use phone are powered on. it again later, simply touch Disconnect on the 2. On the touchscreen†s status bar, touch the Bluetooth settings screen. If you do not want Bluetooth icon. to use your phone with Model 3 again, touch 3. On your phone, enable Bluetooth and set Forget This Device. Once you forget a device, it to discoverable. you need to pair it again if you want to use it with Model 3 (see Pairing a Bluetooth Phone 4. On the Model 3 touchscreen, touch Start on page 91). Search. The touchscreen searches then Note: Your phone automatically disconnects displays the list of all available Bluetooth whenever you leave Model 3. devices within operating distance. 5. On the Model 3 touchscreen, touch the phone with which you want to pair. Within a few seconds, the touchscreen displays a randomly generated number, and your phone should display the same number. 6. Check that the number displayed on your phone matches the number displayed on the touchscreen. Then, on your phone, confirm that you want to pair. Using the Touchscreen 91