book.book Page 17 Friday, July 19, 2013 12:53 PM Phone Phone 6. Check that the number displayed on your Bluetooth® Compatibility You can use your Bluetooth-capable phone phone matches the number displayed on hands-free in Model S provided your phone is the touchscreen. Then, on your phone, within operating range. Although Bluetooth confirm that you want to pair. typically supports wireless communication When paired, Model S connects to the phone over distances of up to approximately 9 metres, and the touchscreen displays the Bluetooth performance can vary based on the phone’s symbol next to the phone’s name to show that software and age. the connection is active. Before using your phone with Model S, you must pair it. Pairing sets up Model S to work Importing Contacts with your Bluetooth-capable phone. Once paired, you can use the Bluetooth You can pair up to ten Bluetooth phones. settings screen to specify whether you want to ModelS always automatically connects to the allow access to your phone’s contacts and last phone that was used (provided it is within recent calls. range). If you want to connect to a different If access is turned on, you can see your list of phone, see Connecting to a Paired Phone, contacts on the Model S touchscreen. Touch page5.18. Phone > Contacts. You can then touch a NOTE: On many phones, Bluetooth turns off if contact to dial its phone number or navigate to the phone’s battery is low. its address. In addition to phones, you can also pair NOTE: Before contacts can be imported, you Bluetooth-enabled devices with Model S. For may need to either set your phone to allow example, you can pair an iPod Touch or an iPad syncing, or respond to a popup on your phone or Android tablet to stream music. to confirm that it is OK to sync contacts. This varies depending on the type of phone you are Pairing a Bluetooth Phone using. For details, refer to the owner documentation provided with your phone. Pairing sets up Model S to work with your If access is turned on, imported information is Bluetooth-capable phone. Once a phone is displayed when you touch the contacts tab on paired, Model S can connect to it whenever the the Phone app. phone is within range. To pair a phone, follow these steps while sitting Unpairing a Bluetooth Phone inside Model S: 1. Ensure both the touchscreen and the phone If you want to disconnect your phone and use it are powered on. again later, simply touch Disconnect on the 2. On the touchscreen’s status bar, Bluetooth settings screen. If you do not want to touch (the Bluetooth icon). use your phone with Model S again, touch Forget This Device. Once you forget a device, 3. On your phone, enable Bluetooth and set it you need to pair it again if you want to use it to discoverable. with Model S (see Pairing a Bluetooth phone). 4. On the Model S touchscreen, touch Start NOTE: Your phone automatically disconnects Search. The touchscreen searches then whenever you leave Model S. displays the list of all available Bluetooth devices within operating distance. 5. On the Model S touchscreen, touch the phone with which you want to pair. Within a few seconds, the touchscreen displays a randomly generated number, and your phone should display the same number. USING THE TOUCHSCREEN 5.17

Tesla Model S | Owner's Manual - Page 81 Tesla Model S | Owner's Manual Page 80 Page 82