Autopark Using Summon Note: Summon is a BETA feature. Summon is designed and intended for use only on a private residential property where the surrounding area is familiar and predictable. When using Summon, you must continually monitor the vehicle. It is the driver's responsibility to use this feature safely, responsibly, and as intended. With Summon, you can move Model 3 in and out of a parking space from outside the vehicle using the mobile app. You can also customize Summon to park or retrieve Model 3 with a single touch of a button and to initiate parking automatically after you double-press the Park gear and exit the vehicle. Using data from the ultrasonic sensors, Summon maneuvers Model 3 forward or reverse into a parking space. When parking is complete Summon shifts Model 3 into Park. Parking is complete when: • Model 3 detects an obstacle in its driving path (within a chosen distance) • Summon has moved Model 3 the maximum distance of 39 feet (12 meters) OR • In the case of reversing, Summon has reached the maximum Summon Distance. To use Summon: • FIRST TIME ONLY: Enable Summon and customize how it works (see Customizing Summon on page 70). • Position Model 3 for parking (see Position the Vehicle for Parking on page 71). • Initiate the parking maneuver using the mobile app or by double-pressing the Park gear. Detailed instructions for each method are provided later. You can summon Model 3 back to its original position if you previously auto parked it and the vehicle has remained in the Park gear. Then, using the mobile app, simply specify the opposite direction. Summon moves the vehicle along the original path provided the environment has not changed (i.e. no obstructions have been introduced). If obstacles are detected, Summon attempts to avoid the obstacles while staying as close as possible to its original path. To cancel Summon and stop Model 3 at any time during a parking maneuver, use the mobile app or (if sitting in the vehicle) interact with the steering wheel, brake pedal, accelerator pedal, or gear stalk. Note: If you want Summon to move multiple times in the same direction, up to the maximum of 39 feet (12 meters), cancel Summon and then re-initiate the parking process, choosing the same direction. Note: Summon can move Model 3 a short distance laterally to avoid an obstacle but in doing so, does not return the vehicle to its driving path (i.e. Summon does not attempt to move Model 3 around an obstacle). Warning: Summon is unable to operate as intended if the ultrasonic sensors are obstructed by a vehicle bra, excessive paint, or adhesive products (such as wraps, stickers, rubber coating, etc.). Warning: Model 3 cannot detect obstacles that are located lower than the bumper, very narrow (i.e. bicycles), or hanging from a ceiling. In addition, many unforeseen circumstances can impair Summon's ability to move in or out of a parking space and as a result, Summon may not appropriately steer Model 3. Therefore, you must continually monitor the vehicle's movement and surroundings and remain prepared to stop Model 3 at any time. Customizing Summon Before operating Summon, use the touchscreen to enable it. Touch Controls > Autopilot > Summon > ON. Then touch Customize to specify how Summon operates whenever it parks or retrieves your vehicle: 70 Model 3 Owner's Manual